Thermal Deformation and Vicat Softening Point Temperature Tester
Description:
This machine is a non-metallic material testing instrument designed and manufactured based on the latest international and national standards. It is mainly used for measuring the thermal deformation temperature and Vicat softening point temperature of non-metallic materials such as plastics, hard rubber, nylon, electrical insulation materials, long fiber reinforced composite materials, high-strength thermosetting laminated materials, etc.
Features:
Adopting an industrial touch screen control system without a cooling fan, the system is stable and has a low failure rate. Digital micrometer for deformation measurement, real-time drawing of four specimen curves, and automatic saving of test data.
Specification:
LHWK-300C thermal deformation and Vicat softening point temperature tester | |
Control method | Industrial touch screen control system. |
Temperature control range | room temperature~300 ℃ |
The heating rate | 120 ℃/h and 50 ℃/h can also be set arbitrarily by customers.。 |
Maximum temperature error | ±0.5℃ |
temperature measurement point | 1 |
Sample Station | 4 |
Sample Station | Digital display micrometers |
Deformation measurement range | 0～5.0mm |
Sample support span | 64mm、100mm |
Maximum deformation measurement error | 0.01mm |
Heating medium | methyl silicone oil; Flash point above 300 ℃ and below 200 centigrade |
Cooling method | Free cooling above 150 ℃, water cooling or Free cooling below 150 ℃ |
Instrument size | 880mm×580mm×800mm |
The required space | m in front and 1m in back, and 0.6m in left and right |
Power supply | 4500VA 220VAC 50HZ |
![Gina WeChat](javascript:Site.hoverQrCode("//50005592.s21i.huaweicloudsite.cn/2/ABUIABACGAAgiajntQYo_rqRxgMw6AI46AI.jpg",this,{"tips":"Scan QRcode"});){kind=link}