Horizontal Tensile Testing Machine
Description:
The horizontal tensile testing machine is mainly used to test the tensile mechanical properties of steel wire rope, anchor chain, steel strand, oil lifting rod, cable, hoisting belt, chain, power cable, power fittings, conveyor belt and other components; And compression test within a certain range. Application fields of horizontal tensile testing machine: construction industry, building materials industry, metallurgy industry, transportation industry, energy and resources industry, scientific research units, colleges and universities, quality inspection center, commodity inspection department, etc
This series machine is specially used for tensile, breaking strength, destructive test of steel wire rope, anchor chain, cable etc. This series uses a horizontal frame test opening to accommodate long specimens and high elongation demands. This machine adopts steel welded frame structure, and uses single-rod double-acting piston cylinder to provide loading force. cylindrical pin plug to mount specimen, and load cell to measure testing force. These test frames are powered by hydraulics for high strength testing and can be customized in length to meet a variety of application requirements. It can adjust the tensile space according to the length of specimen in test process.
Specification:
Model | WAL-600 | WAL-1000 | WAL-2000 | WAL-3000 |
Max.Load(kN) | 600 | 1000 | 2000 | 3000 |
Load Range | 4%~100% of Full Scale | |||
Load Accuracy | ±1% | |||
Relative Error of Displacement | ±1% | |||
Stress Speed(Mpa/s) | 1-45 | |||
Tensile Space(mm) | 0-10000 | |||
Piston Stroke(mm) | 500 or Customized | |||
Method of Specimen Clamping | Bolt way,Specially According to the Specimen that customer Provide | |||
Control Mode | Computer Controlled or Hand Valve Control | |||
Effective Testing Space(mm) | Width 750 or Customized | |||
Fixed-way of Moving Beam | Manual Bolt Fixed or Hydraulic Automatic Bolt | |||
Power Supply | 220v±10%,50/60Hz |