Manual Laboratory press

Manual Laboratory press

Product advantages:

Integrated structure, few sealed connection points, effectively reducing the probability of oil leakage; Optional two column and four column structure, optional dual scale pointer pressure gauge, dual display of system pressure and tonnage, no conversion required; Optional digital pressure gauge with an accuracy of 0.01, providing more precise pressure control; Optional organic glass protective cover for safer protection; Suitable for providing pressure for laboratory powder sample molding.

Product Overview:

Our company specializes in supplying laboratory powder tablet presses and supporting tablet molds. Our tablet presses have small volume, high pressure, and high pressure control accuracy. They have been applied in various industries such as scientific research, teaching, testing, pharmaceuticals, catalysis, and chemical engineering. The new tablet press provided by our company adopts an integrated structure, with an oil tank, main board, and oil cylinder on one main board, without sealed connection points, reducing the possibility of oil leakage points and greatly reducing the probability of oil leakage in the tablet press. In addition, this product can also be used in conjunction with testing instruments such as Fourier transform infrared spectrometer and fluorescence spectrometer for sample preparation. Our company has a complete range of mold specifications for tablet presses, and special specifications can be customized.

Structure diagram of tablet press:

1. Upper plate 2, tension spring screw 3, column 4, oil cylinder 5, tension spring 6, large oil cylinder 7, main plate 8, oil drain valve stem 9, oil cylinder lock nut 10, pressure gauge 11, gauge connecting column 12, pressurization handle 13, oil injection screw 14, oil tank 15, eccentric shaft 16, sealing ball 17, screw 18, upper plate screw 19, oil tank cover 20, high-pressure spring 21, plunger rod 22, high-pressure screw 23, semi-circular washer 24, guide sleeve 25, handwheel 26, screw head 27, oil cylinder top cover 28, sealing ball 29, plunger sleeve 30, sealing ball 31, low-pressure spring 32, low-pressure screw

Operating steps of tablet press:

1. Assemble the mold sleeve and mold bottom, and place the mold pieces on top.

2. Load the sample into the mold and then grind the powder evenly.

3. Place the mold in the center of the tablet press and tighten the handwheel.

4. Tighten the oil drain valve.

5. Shake the pressure lever to start applying pressure until the desired pressure is reached.

6. Release the oil drain valve stem.

7. Remove the mold.

8. Remove the bottom of the mold and install the demoulding tool.

9. Invert the assembled mold and place it in the tablet press.

10. Use the screw of the tablet press to push out the sample of the mold.

11. Remove the mold.

12. Remove the sample from the mold.

Technical parameters: