Nonmetal ultrasonic detector Ultrasonic Pile Integrity Tester

Ultrasonic Pile Integrity Tester

Applicable standards：

Standard Test Method for Integrity Testing of Concrete Deep Foundation by Ultrasonic Crosshole Testing（ASTM D6760-16）

Standard Test Method for Integrity Testing of Concrete Deep Foundation by Ultrasonic Crosshole Testing（ ASTM D6760-08）

Technical Code for Detection of Building Foundation Pile JGJ 106-2014

Dynamic Testing Technology Regulations on Highway Engineering Foundation Pile JTG/T F81-01-2004

Nondestructive Detection Code for Railway Engineering Foundation Pile TB 10218-2019

Technical Regulations on Concrete Strength Detection by Ultrasonic-Rebound Combined Method CECS 02:2005

Technical Regulations on Concrete Defect Detection by Ultrasonic Method CECS 21:2000

Regulations on Concrete Strength Detection of Railway Engineering Structure TB 10426-2004

Detection Code for Building Foundation in Guangdong Province DBJ 15-60-2019

Technical Specification for Foundation Piles Testing of Highway Engineering JTG/T 3512-2020

Introduction：

RSM-SY6 (C) Ultrasonic Pile Integrity Tester is the most cost-effective CSL device, which can complete the acoustic pile integrity detection by transmission method, and is compatible with concrete strength detection by ultrasonic-rebound combined method. concrete crack depth detection, longitudinal wave velocity test of rock mass in geological investigation, detection of loosen zone of tunnel rock mass, etc. It has the characteristics of small size, light weight, simple operation and easy learning.

Application：

Acoustic pile integrity detection by transmission method

Concrete crack depth detection

Concrete strength detection by ultrasonic-rebound combined method

Longitudinal wave velocity test of rock mass in geological investigation

Detection of loosen zone of tunnel rock mass

Test of dynamic and elasticity parameters of non-metallic materials

Integrity detection of underground diaphragm wall

Technical Features

1.The automatic counting and lifting device can be connected conveniently and quickly;

2.With the new automatic interpretation function, the first wave acoustic time and the Sound amplitude interpretation are more accurate;

3.Calculate the depth-wave velocity and depth-wave amplitude curves on-site in time, and the analysis results are clear;

4.Small size, light weight and easy to carry;

5.Industrial-grade capacitive touch screen, soft touch, smooth and precise operation, adapt to strong light environment;

6.High Grade Engineered plastic ABS+PC.Flame retardant material, high temperature resistant design;

7.IP65 Dustproof and waterproof design, fearless of   the extreme;

8.Built-in 4G module, can realize software online one-key upgrade;

9.9mm ultra-thin large-capacity battery, the battery is removable, ensuring uninterrupted work in the field;

10.Newly upgraded software, User-friendly control interface.

Software Features：

Ultrasonic pile analysis software by transmission method

1.The testing point waveform curve of main operation interface, wave train diagram of whole pile and profile depth curve are displayed with linkage.

2.The wave train diagram, data table and gray-scale diagram are switched and displayed randomly.

3. The display proportions of acoustic velocity depth curve, acoustic amplitude depth curve, PSD depth curve of profile can be adjusted randomly.

4.The spectrogram of each testing point can be observed separately for ease of basic frequency analysis.

5.Acoustic velocity and acoustic amplitude interpretation algorithm is accurate, and the acoustic velocity and acoustic amplitude can be interpreted individually.

6.Support oblique detection and fan-shaped detection data analysis and processing.

7.The automatic pipe correction function is owned and the data before and after the correction can be displayed at the same time.

8.The output results have a variety of selection styles and combinations and can be compatible with multiple reporting formats.

9.The headers of output results can be customized for selection and the customized header template can be saved.

10.The wave train diagram and depth curve diagram can be output on the single-page report paper at the same time.

11.The picture output, print output, Word file output, Excel file output and other output modes are supported.

12.Complete reports can be generated in batch.

Specification：

Standard Configuration：