Paint Impact Tester TCJ-II
Description:
The catheter height of tcj elastic impact tester is 1265mm, which conforms to iso6272m, astmd2794, NCCA Ⅱ - 10 and X-1, ECCA meth No.5, nft30-039 and other standards. Tcj elastic impact tester is used to test the performance of anti cracking or substrate glass
of paints, varnishes and other products when the dry film is deformed by heavy hammer impact under standard conditions. The test results of tcj elastic impact tester are calculated according to the number of kilograms meters (inches pounds) required for cracking or peeling caused by coating deformation.
Specification:
Model | TCJ |
Base size | 300mm×240mm×35mm |
Conduit height | 1265mm |
Heavy hammer and die base | iso100: 1kg falling weight conforms to ISO, ball diameter 20mm
Iso101: die base for numbering iso100 conforms to ISO inner diameter 27mm
Iso200: an additional weight of 1kg used for numbering iso100 is connected to a falling weight
Astm100: drop a weight of 2 pounds in accordance with ASTM ball diameter of 0.625in (15.9mm)
Astm101: inner diameter of die base for numbering astm100 is 0.65in (17mm)
Astm200: the additional weight of 2 pounds used for numbering astm100 is connected to the falling weight |
A set of depth control rings | one base ring, one ring with thickness of 1mm, 2mm, 4mm and 5mm, is used to control the indentation depth of the hammer by 2-10mm |
Overall weight | 18kg |
![Gina WeChat](javascript:Site.hoverQrCode("//50005592.s21i.huaweicloudsite.cn/2/ABUIABACGAAgiajntQYo_rqRxgMw6AI46AI.jpg",this,{"tips":"Scan QRcode"});){kind=link}