Glazed Tiles Abrasimeter Glazed Ceramic Tile Abrasion Tester
Description:
This product is tested according to ISO/DIS 10545/7-1994 "Ceramic tiles - Glazed tiles - Test formula for surface wear resistance of ceramic tiles"
Design of experimental equipment requirements in GB/T 3810.7-2016 "Ceramic Tile Glaze Wear Resistance Test Method" and GB/T 3810.7-2016
make. The ceramic tile glaze wear tester places a certain amount of abrasive on the glaze surface of the ceramic tile, so that the abrasive is on the glaze surface
Grind and visually compare the differences in the glaze surface of the ground sample for classification.
Specifications:
Sample size: 100 × 100mm, capable of conducting wear resistance tests on 8 samples (also known as eight head grinding) simultaneously. Wear resistance tests with less than 8 samples can also be used interchangeably; |
The distance between the center of the supporting turntable and the center of each sample is 195mm, and the distance between adjacent sample fixtures is equal; |
Rated speed of support disk: 300 ± 10% p/min; |
Eccentricity: e=22.5mm |
The inner diameter of the metal fixture with rubber seal is ø 83, the height of the space inside the fixture is 25.5m, and the provided test area is approximately 54 square centimeters. |
Product specifications:
The grinding medium for each sample is 70.0g of steel balls with a diameter of 5mm; 52.5g steel ball with a diameter of 3mm;
43.75g steel ball with a diameter of 2mm;
3.0g of corundum abrasive with a particle size of F80 as specified in ISD 8684-1; 20mL of deionized water or distilled water.
![Gina WeChat](javascript:Site.hoverQrCode("//50005592.s21i.huaweicloudsite.cn/2/ABUIABACGAAgiajntQYo_rqRxgMw6AI46AI.jpg",this,{"tips":"Scan QRcode"});){kind=link}