Curing Bench with Cooling Heating System

Curing Bench with Cooling Heating System

Description:

Sby-iii cement automatic constant temperature curing water tank is a special equipment for the laboratory to cure the cement samples in the static 20 ℃± 1 ℃ constant temperature water according to the national cement strength testing method ISO method. Several water tanks are added in the water tank to put the cement samples. It cools and heats the circulating water in the water tank through full automatic control and electronic digital display to meet the requirements of water temperature. It is a necessary product for national scientific research departments, first-class laboratories and relevant units with such requirements.

Structure:

Temperature intelligent instrument, automatic control, stainless steel (or plastic) inner liner is used inside, welded and formed, electrostatic spraying is used for the outer skin, imported compressor unit is used for refrigeration, water immersion heating pipe is used for heating, and the water pump in the working room is automatically circulated.Cement Testing Equipment

Working principle:

2. When the water temperature in the pool is higher than 20 ℃± 1 ℃, the compressor will automatically cool down. When the water temperature is lower than 20 ℃± 1 ℃, the heating pipe starts to heat, and the water pump automatically circulates to keep the water temperature consistent. In this way, the water temperature is always kept between 20 ° C and 1 ° C Cement Testing Equipment

Usage:

3. Open the upper cover and place the small water tank (place the number of water tanks according to the number of cement test blocks). The water in the small water tank shall be less than the cement test blocks, and then inject water into the large water tank (it shall not exceed the small water tank, and check whether there is water leakage). Connect the power supply, check whether there is leakage, debug the temperature controller, and set the upper limit of the temperature controller to 20.8 ℃ and the lower limit to 19.5 ℃.

Specification: