Roller compactor SYD-0703-2

Roller compactor SYD-0703-2

STANDARD:

EN 12697-33

Description:

The pneumatically powered roller compactor was originally designed to provide a solution to the problem of making homogeneous laboratory specimens large enough to be used for wheel-tracking tests. It is used to compact to either a target mixture density or to provide a

standard compactive effort to a range of different asphaltic paving materials. Vibration is available as an option.

The roller compactor can be used for:
Wheel tracking specimens, beams for fatigue and modulus tests, coring into specimens for use in modulus and permanent deformation tests.

Features:
• Slabs can be from 50 to 100mm thick.
• Slabs can be 305x305mm or 305x405mm
• Vibrating roller
• Safety cage with three side complete vision
• Easy to maintain
• Adopt Japanese Mitsubishi PLC automation control system, safe, reliable and stable; it has perfect selfprotection function, capable of long operation under complicated driving conditions.
• Use Japan Mitsubishi touching screen to realize manmachine interaction with clear and visible Chinese-English interface, operate steadily by easy touch and display real-time data.
• Japanese Panasonic transducer can arbitrarily change vibration frequency between 0-50Hz.
• Fanlike steel roller.
• Maximum compaction load is 55Kn, equivalent to maximum static site rolling compaction.
• One-step molding of test specimen according to preset height or density.
• PLC allows to set times of rolling compaction under each load in sequence of P1, P2, P3 and P4; P1 can be set to minimum times of 2, then add load through P2, P3, and P4.
• Compaction load can be adjusted and set by 4 pressure-regulating valves.
• Vibratory compaction, adjustable frequency, simulated site vibration rolling compaction.
• 3 safe protection doors; opening any of them can break air, cut electricity to protect operator and prevent wrong operation.
• Test specimens can be used to wheel tracking test, and can be used to indirect tensile test after coring, or to be cut for fatigue test.
• Molds easy to insert and remove.

TECHNICAL PARAMETERS:

Power: 1000W
Electrical supply: 220-240V, 50-60Hz at 16A
Maximum load: 55kN
Trolley travel: ±150mm
Cycle time: variable up to 10 cycles per minute
Vibrating frequency: 0-50Hz
Compressed air: 0.6-0.8Mpa, 700L/min
User languages: English
Dimension: 1780x950x1550mm
Weight: about 750kg